How much does pressure cleaning cost in Canberra?

The honest answer every tradie gives — "it depends" — is annoying, but it's true. Pressure cleaning is priced on the size, surface, condition and access of the job, so a single number is meaningless without those details. What we can give you is a realistic set of Canberra ballparks for 2026, plus a clear breakdown of what pushes a price up or down.

Typical Canberra pressure cleaning prices (2026)

These are indicative starting prices, GST included. Most standard residential jobs land in these ranges:

Service	Typical range	Starts from
Driveway & concrete	$150 – $450	$149
House exterior soft-wash	$250 – $600	$249
Roof clean & treatment	$399 – $900	$399
Solar panel cleaning	$149 – $350	$149
Gutter clearing	$149 – $420	$149
Decks & timber	$149 – $400	$149

A small minimum call-out applies so short trips stay worthwhile — that's why the driveway and gutter jobs start around the same figure even though they're very different tasks.

What makes the price go up or down

1. Size

Concrete and timber are usually priced per square metre, so a single garage apron costs a fraction of a long double driveway. House, roof and gutter jobs scale with the footprint of the home.

2. Single vs double storey

This is the big one people forget. A double-storey house wash, roof clean or gutter clear takes materially longer and needs more gear and safety setup, so it's priced higher than the single-storey equivalent — often 30–50% more.

3. Condition

A driveway cleaned every year is quick. One that hasn't been touched in a decade — thick black mould, ingrained oil, moss in every joint — needs pre-treatment and more passes. Heavy staining typically adds around 20%.

4. Access

Steep blocks, high two-storey gutters, tight side passages or no nearby tap all add time and equipment. Tricky access commonly adds around 15%.

5. Bundling

Because most of the cost of a visit is getting the gear on site, combining jobs saves money. Booking a driveway and a house wash together is cheaper than two separate call-outs — we pass a multi-service saving back to you.

Why "cheap" quotes can cost more

A rock-bottom price often means a rushed job at the wrong pressure — stripped render, etched concrete, or water forced up under your eaves. Fixing that costs far more than the clean did. Look for someone who is fully insured, matches the technique to the surface, and gives you a fixed price up front rather than an hourly rate that can blow out.

Getting an accurate figure

The fastest way to a real number is a couple of photos and the rough size. Use our instant estimate tool to ballpark it yourself in seconds, then send it through and we'll confirm a fixed price — usually the same day.